ME-9100 – Air Scribe for Bulk Matrix Removal
The ME-9100 is built for power and efficiency, making it the go-to air scribe for bulk matrix removal in fossil and mineral preparation. With a strong 16,000 strokes per minute and operating pressure of 90–120 PSI, it’s ideal for quickly removing large volumes of material while maintaining control and precision.
This robust tool consumes 2.5 CFM, making it a great match for high-output workstations. It comes equipped with a 1/8" diameter, 1.5" long tungsten carbide stylus, ground to a smooth, rounded point for effective and durable matrix removal.
With its 8' durable hose, quick disconnect coupler, and stylus pre-installed, the ME-9100 arrives ready to plug into your compressor and go straight to work.
Recommended Compressor: We suggest a 2 HP or greater compressor with a 20-gallon tank or larger for continuous, uninterrupted performance.
✅ What to look for in a compressor:
| Spec | Recommendation |
|---|---|
| CFM Output | At least 3.0 CFM @ 90 PSI (headroom above your tool's 2.5 CFM) |
| PSI | Must easily hit and hold 120 PSI |
| Tank size | 20–30 gallons minimum (bigger = better for cycle control) |
| Compressor type | Oil-lubricated preferred (quieter, lasts longer); ultra-quiet models if indoors |
| Duty cycle | Ideally 100% rated if you're working for hours |
ME-9100 Tool w/ 2" Bushing and 3" Stylus
First file
Second file
Third file
Download Product Specs
Only you can see this. To display the widget on your site, open the Settings Panel & open the Dashboard to upload files for the desired products.
