ME-9100 Parts - 2010 PRICE LIST
(S&H not included - see ordering info) |
ME-7173 |
Inlet: inside body part of ME-9100 that the cylinder slides over |
$75.90 |
| ME-7174 |
Cylinder for ME-9100 |
$60.50 |
| MP-7175 |
Power Regulator (Valve Sleeve) |
$49.50 |
| ME-7180 |
Front End Sleeve |
$73.00 |
| CP Power Mod. |
Improves Performance of CP scribes |
$55.00 |
| Refurbish |
Disassemble, clean and inspect air tool; reassemble with new parts as needed |
$46.00 |
| Repair AirScr |
Labor charge for repairing air scribe |
$46.00 |
| Resharpen |
Resharpen stylus (all models) |
$8.00 |
| ME-7208 |
Piston for ME-9100 |
$27.50 |
| ME-PIN |
Roll pins |
$2.50 |
| ME-RNG |
Retaining ring for ME-9100 |
$3.00 |
| ME-Muffler |
Muffler for ME-9100 (first edition) |
$25.00 |
| METB Glass Teflon Plug |
Replacement plug for non-rotating bushing |
$13.50 |
| METB 1 |
1" bushing for ME-9100 |
$55.00 |
| METB 1DB |
1" Diffuser Bushing for ME-9100 |
$71.50 |
| METB 2 |
2" Bushing for ME-9100 |
$61.00 |
| METB CL |
Paleo Tools long, non rotating chisel bushing for ME/CP/MP |
$61.00 |
| METB CS |
Paleo Tools short, non-rotating chisel bushing for ME/CP/MP |
$58.00 |
| METB SS |
Factory CP/MP bushing (without knurled knob or hex opening) |
$20.00 |
| METB T3 |
Replacement nylon bushing for Tri-tip Front End |
$24.00 |
| METF 1.5 |
ME-9100 front end/barrel with 1" bushing and 1.5" stylus |
$172.00 |
| METF 2 |
ME-9100 front end/barrel with 1" bushing and 2" stylus |
$176.00 |
| METF 3 |
ME-9100 front end/barrel with 2" bushing and 3" stylus |
$188.00 |
| METF 4 |
ME-9100 front end/barrel with 2" bushing and 4" stylus |
$193.00 |
| METF CL |
ME-9100 front end/barrel with long chisel bushing & long chisel stylus |
$190.00 |
| METF CS |
ME-9100 front end/barrel with short chisel bushing and short chisel stylus |
$182.00 |
| METF T3 |
Tri-tip Front end & bushing, supports chisel styli, pointed styli in 1.5" & 2" |
$118.00 |
| METFE T3-NS |
Tri-tip front end (no stylus) |
$114.00 |
| METS 1.5 |
1.5" stylus for ME-9100 |
$44.00 |
| METS 2 |
2" stylus for ME-9100 |
$48.50 |
| METS 3 |
3" Stylus for ME-9100 |
$54.00 |
| METS 4 |
4" stylus for ME-9100 |
$59.50 |
| METS 6 |
6" stylus for ME-9100 |
$82.00 |
| METS C2 |
Paleo Tools 2" chisel stylus for ME/CP/MP (non rotating) |
$51.00 |
| METS C3 |
Paleo Tools 3" Chisel Stylus for ME/CP/MP (non rotating) |
$56.00 |
| METS E1.5 |
1.5" engraving stylus for ME-9100 |
$44.00 |
| METS E2 |
2" engraving stylus for ME-9100/CP |
$48.50 |
| METS L1.5 |
Landscaping stylus 1.5" for ME-9100 |
$33.00 |
| METS S |
Factory made Chicago Pneumatic stylus |
$16.50 |
| METS T3C2 |
2" chisel stylus for Tri-tip front/bushing |
$52.00 |
| METS T3C3 |
3" chisel stylus for tri-tip front/bushing |
$58.00 |
| INLET |
Part # ME-7173 for ME-9100 |
$75.90 |
| CYLINDER |
Part # ME-7174 for the ME-9100 |
$60.50 |
| POWER REG |
Part # ME-7175 for the ME-9100 |
$49.50 |
| FE SLEEVES |
Part # 7180 for the ME-9100 |
$73.00 |
| PISTON |
Part # ME-7208 for the ME-9100 |
$27.50 |
| ROLL PIN |
Part # ME-PART;PIN for the ME-9100 |
$2.50 |
| RETAINING RINGS |
Part # ME-7187 for the ME-9100 |
$3.00 |
| O S10ME |
package of 10 "O" rings for CP/ME stylus |
$5.00 |
| *if you are unequipped to sharpen your own
stylus, you can send it to us and we will re-sharpen it for you. S&H for a
small item is usually no more than $5.00 |
