ARO and PaleoARO parts-
2010 PRICE LIST
(S&H not included - see ordering info)
|
ARO Shoulder Mod |
Service: modification to add shoulder for "O" ring - snugs up front end fitting |
13.00 |
| Refurbish |
Disassemble, clean and inspect air tool; reassemble with new parts as needed |
31.00 |
| Repair AirScr |
Labor charge for repairing air scribe |
31.00 |
| Resharpen |
Resharpen stylus (all models) |
8.00 |
| Large Chisel |
Moll point chisel for large air hammer |
please ask |
| ARO-STY-STK 2.5 |
2.5 carbide stylus for stock ARO tool |
30.00 |
| ARO STY STK PTL |
PT long stylus for stock ARO, 3/8" longer |
24.50 |
| ARO STY STK |
Engraving stylus for stock ARO |
16.00 |
| ARO-BUSH |
stock ARO bushing |
18.00 |
| Carbide Rod |
1/32 x 12" carbide rod |
33.00 |
| Carbide Rods |
1/16" x 12" carbide rod |
24.00 |
| 8315B-04 |
Throttle Valve for Paleo ARO |
27.50 |
| 8315B-05 |
Ring Nut for PaleoARO |
17.50 |
| 8315B-06 |
Brass shut-off valve for ARO (goes inside the body) |
9.00 |
| SEAL 8315B-11 |
Rubber seal for shut-off valve (for ARO like tools) |
5.50 |
| PAT-Front |
Modified ARO front end (no bushing) |
48.50 |
| PATB FEL |
PaleoARO long bushing and front end assembly |
84.50 |
| PATB FES |
PaleoARO short bushing and front end assembly |
76.50 |
| PATB L |
PaleoARO long bushing |
36.00 |
| PATB S |
PaleoARO short bushing |
28.00 |
| PATS 2 |
2" PaleoARO carbide stylus |
49.50 |
| PATS 2.5 |
2.5" PaleoARO carbide stylus |
53.00 |
| PATS 3 |
3" PaleoARO carbide stylus |
54.00 |
| PATS 3.5 |
3.5" PaleoARO carbide stylus |
55.00 |
| PATS C2 |
Chisel stylus for PaleoARO |
49.50 |
| PATS L2 |
2" PaleoARO landscaping carbide stylus |
41.00 |
| SPR ARO |
Spring for Stock ARO stylus |
4.50 |
| SPR-3R ARO |
(3) Springs for Stock ARO stylus |
11.00 |
| SPR PAC |
Spring for PaleoARO chisel stylus |
4.50 |
| SPR-3R PAC |
(3) Springs for PaleoARO chisel stylus |
6.75 |
| SPR PARO |
PaleoARO stylus return springs |
4.50 |
| SPR-3R PARO |
(3) PaleoARO stylus return springs |
11.00 |
| HSE EZ8 |
2' 200psi hose that attaches to Easy Snap connector (must have adaptor) |
14.50 |
| HSE-EZK 8315B |
Kit for converting to the easy connect air hose assembly for 8315-B |
43.00 |
| HSE-EZK-GENARO |
Assembly kit for converting genuine ARO to the EZ Connect Air Hose |
45.00 |
| HSE-EZK-PARO |
kit for converting to the Easy Connect Air Hose for Paleo Aro |
36.00 |
| HSE-FIT AHC-3 FEM |
Quick Disconnect Coupling part - female end (US Standard) |
5.00 |
| HSE-FIT AHC1-FM |
Quick Disconnect part - Male side with Female NPT coupling (US Standard) |
6.00 |
| HSE-FIT AHC2-MM |
Quick Disconnect part - Male side with Male NPT coupling (US Standard) |
6.00 |
| HSE-FIT Japanese |
Quick Disconnect part - Japanese Model |
11.00 |
| HSE-FIT Euro |
Quick Disconnect part - European model |
11.00 |
| HSE-FIT Air Filters-Inline |
Inline Air Filters |
11.00 |
| HSE-FIT Air Hose Fitting |
NPT fitting and sleeve for crimping on the end of an air hose |
5.50 |
| HSE-FIT-EZ AIR FIL Combo |
Combination of air filter, quick disconnect, and EZ Hose connector 1/4 NPT |
18.00 |
| HSE-FIT-EZ EZHC-8315B |
Connector for 8315B to be used with EZ Hose |
20.00 |
| HSE-FIT-EZ EZHC-PA |
Connector for PaleoARO to be used with EZ Hose |
3.75 |
| HSE-FIT-EZ EZHC GA Adapt |
Threader adaptor (double ended) for Genuine ARO |
10.50 |
| S10ARO |
(10) "O" Rings for ARO Stylus |
5.00 |
| S10PARO |
(10) "O" Rings for PaleoARO stylus |
5.00 |
| SARO |
"O" Ring for ARO stylus |
0.85 |
| O SME |
"O" Ring for ME/CP Stylus |
0.85 |
| O SPARO |
"O" Ring for PaleoARO Stylus |
0.85 |
| |
|
|
| *if you are unequipped to sharpen your own
stylus, you can send it to us and we will re-sharpen it for you. S&H for a
small item is usually no more than $5.00 |
